Features:
* Average of double the fluid capacity
* Fulid runs up to 45 degrees cooler
* Ease of service
* The dipstick is knurled for quick removal, the flat is marked low/high to check lube level, and a magnet which acts oas an open filter, is the lower end. The MS 7/8 -14 THD port is large enough to use for filling
* The Magnet-filled drain plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.
* The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone
* Plugs, cap screws, and washers are stainless steel in most applications
* Mag-Hytec manufacturers the best covers and pans available today